Are there real gains to be had, or is this just a fad?
Leadville 100 has always been a curiosity on the calendar of American off-road racing.
In the heady days of the mountain bike boom, Leadville was the race where riders shed every possible gram, stripped their setups to the essentials, and leaned hard into maximising climbing efficiency over the 105 miles of high-altitude terrain.
Over time, that singular focus expanded. Aerodynamics began to creep into the conversation, with tri-bar extensions making periodic appearances throughout the 2010s, an era when aero gains briefly eclipsed all else. The 2x vs. 1x drivetrain debate followed a similar arc, as top racers sought the elusive balance between maintaining speed on the flat middle miles and powering through the steep climbs that bookend the course.
Now, the next frontier is handlebar choice. Among the pointy end of the field, the question is: do I stick with traditional flat bars for better handling and a more natural mountain bike fit, or switch to drop bars to squeeze out aerodynamic gains and adopt a gravel-style riding position better suited for the fast, open stretches?
Why this mix works at Leadville
Leadville is the biggest, most iconic mountain bike race in the United States. The high-altitude course sits at 9,200 feet (2,804 m) at its lowest point and goes all the way up to 12,424 feet (3,787 m) at its highest point: the summit of Columbine Mine.
Over its decades-long history, the race has seen national and international talent cycle through and test themselves on the unique course. While much has changed in the cycling world, Leadville’s course has remained fairly consistent, defined by its long, tough climbs, exposed course and a surprisingly small amount of singletrack trail given its mountain bike title.
Because of this unique blend of terrain and demands, unconventional bikes have long been part of the Leadville scene, with drop-bar builds resurfacing from time to time. Always nearby, but rarely at the pointy end of the race.
That started to change most notably with Cory Wallace in 2022, who finished 13th with a drop-bar setup. Dylan Johnson followed that up in 2023 with a top-20 result, before Keegan Swenson rode a drop-bar build to the top spot of the podium in 2024, pushing the drop-bar subplot into the mainstream.
Yet, as this shift to drop bars coming at the same time as gravel bikes’ big tyre revolution, why not go a step further and compete on gravel bikes?
“Suspension on a gravel bike is more about comfort and vibration dampening over rough terrain to improve efficiency, but this suspension on a mountain bike isn't just about comfort; it's more about it making the bike move faster,” Haley Smith said of the key difference between a gravel bike with suspension versus a mountain bike with drop bars.
Smith is an Olympic mountain biker and former Life Time Grand Prix series winner. She's spent the past few months aboard a drop bar-equipped full-suspension mountain bike, and even raced it at the Migration gravel race in Kenya. For her, there is a clear reason to choose a mountain bike with drop bars over a gravel bike with suspension, even if they might seem similar on paper.
“The [Trek] Supercaliber is going to go faster up and down at certain points,” she said. “The top of Powerline is very technical. If you want to go faster, the mountain bike would do it better, because, if its suspension functions properly, it preserves your momentum through rougher terrain.
“You need legitimate suspension to have that effect. You need to have enough suspension to have the rebound, the damping, and the compression all functioning for you to hold forward momentum.”
With the big rocks, dips, and high speeds of Leadville, momentum preservation is key. Wide tyres thrive, full-suspension is ubiquitous, and a gravel bike is not quite the right tool for the job. Yet, aerodynamics are on the other side of the momentum preservation coin, and this is where some of the gravel tech is leaching over, even if the bike frames are still different.
The considerations around making the switch
When it comes to aerodynamics, drop bars on a mountain bike make a lot of sense, but there are downsides to consider as well. Most notably, in the handling.
Mountain bikes are built around a short stem paired with wide flat bars, which means they tend to have a longer reach than a drop-bar bike, making the fit with drop bars a hard transfer. Plus, the handling of a drop bar significantly changes the characteristics of a mountain bike on rocky terrain, with riders and the Life Time organisation stressing that this choice is best kept for the professionals. And while it is yet to be seen how pervasive drop bars are in the amateur ranks, what is clear is that skill level will influence who will make the leap to drop bars.
“I was completely undecided on what I would race the night before the stage race started,” Melisa Rollins said. Rollins is the defending Leadville champion and just took the win at the Leadville Stage Race last month as well, where she tested a drop bar setup.
I had two setups ready to go: I had my mountain bike with flat bars, and I had a newly set up drop bar bike because I hadn't completely dialled in the fit.
“Keegan [Swenson] will laugh because he told me at the beginning of the year I'd probably need to size down a frame, and I didn't. I tried to make it work, but at the last second, I knew I had to size down. So getting the fit right was not completely straightforward for me.”
Rollins is a prime example of a rider resistant to the drop bar shift. She dominated the race last year with flat bars, and her primary challenger, Kate Courtney, is also sticking with flat bars as she drops into the race from the Cross-Country World Cup circuit. Why not just run it back and repeat what worked so well?
“I've never had access to the ability to dive into any sort of marginal gains,” Rollins said in response. “This year, to be completely honest, I am on entirely new equipment, and it wouldn't be like I'm just running things back. Beyond my frame, I'm on completely different equipment.”
With the shake-up came the chance to test the drop bars, which ultimately won out.
“I'm super happy with my setup, and to be honest, the drop bars are freaking fun,” Rollins said. “I was a bit scared that I would get dropped going down Powerline, and that was my only apprehension about running the drop bar setup, but I'm the exact same speed, if not faster, on every descent with drop bars.”
Radical departures from the norm are typically adopted last by the masters of the craft. Sean Kelly, for instance, famously raced in toe clips long after the clipless pedal was standard in the pro peloton. In our example, this suggests the pure mountain bikers, the ones who begrudgingly race on drop bars when they are the obvious choice, might resist the call.
“I've raced it on a hardtail the last three years, and I've just always gotten to the last hour and a half, and every bump hurts so bad with that amount of fatigue in the race,” Cole Paton, the 2025 marathon mountain bike national champion, told Cycling Weekly. “I knew I wanted to go full suspension without a doubt. Then, the next question was: Do I go with the drop bar or not?”
Kicking and screaming
Paton had to relent. From his perspective, with a massive bank of technical skills few on the gravel scene possess, it was undeniable.
“The mountain biker in me was trying to justify keeping it a mountain bike as much as I could,” he said, “I really didn't want to build this atrocious Frankenstein bike. But in the end, I built up the drop bar out of just curiosity, and it was just like clearly so much easier to get up to speed and maintain speed with the narrower bars.
“It's not even like the drop bars necessarily, it's just closing off the chest cavity in a neutral riding position where you are just that much more dynamic.“
Putting the drop bars through their paces before the big dance
No comments:
Post a Comment